Laser Beam Machining (LBM)
In this article, we will learn about Laser Beam Machining, Working Principle Advantage & Disadvantage. The laser is an electromagnetic wave. This can cause monochromatic lighting. The laser is the abstract of the radiation-induced by light amplification.
Working Principle ( Laser Beam Machining )
The laser rod Ruby rod, Xenon flash illuminated in this system. The mirrors of the laser rod are reflected in the glass. When the flash is burned by light, the denser light is supplied.
Is being promoted. Thus, the laser rod uses these lense rays to blow the laser rays onto the work object. These rays remove metal and evaporate.
Applications
- In small hard metals such as Ceramic, small holes are used to hold the holes. Used for
- Drilling holes in surgical needles.
- Used to create complex image systems.
Advantages
- Any metal can be machined.
- There is no depreciation on the Tool.
- The work object has no mechanical key.
- Other non-metallic materials may also be machining.
Disadvantages
- Efficiency is low in this way.
- Flash lamp life span
- The machining cavities are not a completed circle.
- The laser machine is expensive.
- It is not possible to use metals that transmit excessive heat and reflect excess
Post a Comment