Methods to Selection Of Grinding Wheels - Selection Of Grinding Wheel

Explain The Methods Selection Of Grinding Wheels – The Selection Of Grinding Wheel

The Selection Of Grinding Wheel

In this article, we will learn about The Selection Of Grinding Wheel. Before choosing a grinding wheel to perform a particular task, you should carefully consider the following tips.

1. Material Properties

Grinding metal should use a silicon carbide wheel for high tensile strength metal such as steel, aluminum oxide wheel, and low tensile strength such as cast iron. For hard, brittle metal, use fine-grained wheels with fine powder and dense structure. Coarse grain open structureWheels should be used for soft ductile metal. Wheels should be used for hard metal and soft wheels. Generally, the vitrified bond wheel should be used.

2. Work contact area

Wheel with coarse grain open structure should be used for grinding large quantities of the contact area of ​​the grinding wheel in the work material.

3. Machine Condition

The grinding machine used can be used in good solid machines with smooth wheels.

4. Wheel feed

If Wheelfeed is higher than the speed of the workpiece, use Soft Wheels. Wheel feed for vitrified bond wheels can be up to 2000 meters per minute.

5. Work speed

If the work object rotates at a high speed, use a difficult Wheel.

6. Grinding machine of position

It is important to consider the condition of the grinding machine (the condition of the condition of the spindle bearing, the manner in which the foundation is laid, and the way in which the work is captured.